20 Center Ave NW | Eyota, MN  | Premier Designer And Builder Of Custom Cabinetry | Serving All Of SE Minnesota

 Phone: 507-545-2856  |  Fax: 507-545-2230

The most recognized brand in custom cabinetry throughout SE Minnesota by builders and remodelers

© 2019 by Higgins Custom Cabinetry, All Rights Reserved - WEB Site by Design Build Media Group presented by R Thomas Consulting, LLC

Cabinetry Care by Higgins Custom Cabinetry

Providing Outstanding Service Throughout  The Entire Building Process

Caring For Your Cabinetry...

 

Your cabinets are finished with a high quality M.L. Campbell wood finishing system.  Cared for properly, they will remain both beautiful and functional for many years to come!

 

Proper Care…

‚Äč

Removing Dust:  Dust build-up, which is made up of small airborne particles, may scratch or dull the surface if not removed correctly.  Simply wipe the surface with a cloth dampened with a cleaning polish or mild detergent.

 

Clean: Fingerprints, cooking fumes, smoking residue, etc. accumulate on any finished surface.  None of these contaminants will harm the finish, but they should be periodically removed to restore the finish to its original luster.  Just wipe the surface with a cloth dampened with a non-wax containing polish or mild detergent solution.  Avoid the use of ammonia based products or silicone oils as they may cause damage if used over a long period of time.

 

Spills: The finish is durable and resistant to most household spills.  However, spills should be wiped up promptly to avoid potential problems.

 

Avoid: Excessive, prolonged exposure to direct sunlight, high temperatures and high humidity can cause damage to both the finish and the wood itself.  These should be avoided.

 

Following these simple steps will keep your finished item looking like new for many years!

 

~ M.L. Campbell

 

Adjusting Hinges…

Your cabinet doors have special hinges that are adjustable and demountable.  With the change of seasons, your cabinet doors may move a little and require some adjusting.  All your hinges have a “CAM” adjustment; each turn of the screws will adjust the doors.  When you open your cabinet doors, you will see the hinges with a black cover on them.  This cover will need to be removed to expose the screws.  Each screw will adjust the door in a different direction.

 

Screw closest to door moves door left and right.

(Clockwise moves door toward hinge side.)

 

Middle screw moves the door up and down.

 

Last screw moves the door in and out.